Documents
SPC

SPEC SHEET
ULR-IN-PIDR-48W
LED Indoor Electronic Ribbon Light Plug-In Drivers, 48W
Technical Specs
- :: Input voltage: 100~240VAC, 50/60Hz
- :: AC Input Current: Max 0.5A
- :: Output power: 48W
- :: Output DC Voltage: 24VDC
- :: Min Load: 0.00A
- :: Rated Load: 2A
- :: Line Regulation: ± 1%
- :: Load Regulation: ± 5%
- :: Efficiency: 82% Min
- :: Turn on delay time: 3Sec Max. at 115VAC & Max Load
- :: Rise time: 40mS Min. at 115VAC & Max Load
- :: Hold up time: 5mS Min. at 115VAC & Max Load
- :: Male 24V connector included
- :: Operating Temperature: 32°F to 104°F
- :: Protection Function: Short Circuit Test, Over current protection, Over Voltage Protection
- :: Relative Humidity: 5% to 90% RH, 72Hrs, Full Load , Normal operating.
- :: Ripple and Noise: 240mV p-p
- :: EN55022
- :: AC power cord can be cut for hardwiring. Ensure proper installation according to local electrical codes and standards.
- :: DIELECTRIC STRENGTH Hi-Pot: Primary to secondary: 3000Vac10mA/3S for type test.
- :: Insulation resistance: Primary to secondary:10MΩ min at 500V DC