 | WXR-2 | - :: Dimensions:1-gang: width 2-¾" height 4-½" depth 1"2-gang: width 4-9/16" height 4-½" depth 1"
- :: Material: die-cast aluminum with powder-coated finish
- :: Includes gasket and mounting hardwarePRODUCT FEATURES
- ::: Reinforced connector outlets
- :: Scratch resistant powder-coated finish
- :: Suitable for wet locations - NEMA 3R rated
- :: Connector outlets accept threaded fittings & conduit
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, mounting lugs and ground screws included
| | |
 | PL12-ILDMR-BK | | | |
 | SCX-2FT-20W-MCT-D-IDL | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 20W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: LPW: 110
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included) See Page 2
- :: Power Cord comes out through the Suspension Hole on the End of the Fixture from the Top
- :: 5-Year Warranty
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 2200LM
- :: Color Temperatures: 3000K/3500K/4000K
- :: Multi-CCT(Selectable with Switch Inside the Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: 50,000 Hours Rated Life
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
 | SCX-2FT-20W-MCT4-D-IND | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 20W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: Lens Type: Opal Polycarbonate Lens
- :: Lens Snaps into Housing
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included See Page 2
- :: Power Cord comes out through the Suspension Hole on the End of the Fixture from the Top
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 2197LM/2316LM/2348LM/2390LM
- :: Color Temperatures: 3000K/3500K/4000K/5000K
- :: Multi-CCT(Selectable with Switch Inside the Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: 50,000 Hours Rated Life
- :: 5-Year Warranty
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
 | ULR-IN-16F-SO-27K | - :: LED: SMD2216 chip spaced 5/8" on center, 19 per foot, 0.08 watts each chip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 watts per foot
- :: Lumens: 100 lumens per foot, 4.73 LM per LED
- :: CRI: 90
- :: Max run: 32'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| |  SPEC |
 | ULR-IN-16F-HO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
 | SCX-3FT-30W-MCT-D-IDL | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 30W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: Efficacy: 110 LPW
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included) See Page 2
- :: Power Cord comes out through the Suspension Hole on the End of the Fixture from the Top
- :: 5-Year Warranty
- :: Dimmable: 0~10V Dimming
- :: Total Lumens:3300LM
- :: Color Temperatures: 3000K/3500K/4000K
- :: Multi-CCT(Selectable Switch Inside Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: 50,000 Hours Rated Life
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
 | SCX-4FT-40W-MCT4-D-IND | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 40W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: Efficacy: 110 LPW
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: Lens Type: Opal Polycarbonate Lens
- :: Lens Snaps into Housing
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included) See Page 2
- :: Power Cord comes out through the Suspension Hole onthe End of the Fixture from the Top
- :: 5-Year Warranty
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 4400LM
- :: Color Temperatures: 3000K/3500K/4000K/5000K
- :: Multi-CCT(Selectable Switch Inside Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: 50,000 Hours Rated Life
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
 | SCX-4FT-40W-MCT-D-IDL | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 40W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: LPW: 110
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included) See Page 2
- :: Power Cord comes out through the Suspension Hole on the End of the Fixture from the Top
- :: 5-Year Warranty
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 4400LM
- :: Color Temperatures: 3000K/3500K/4000K
- :: Multi-CCT(Selectable Switch Inside Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: 50,000 Hours Rated Life
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
 | SCX-3FT-30W-MCT4-D-IND | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 30W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: Efficacy: 110 LPW
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: Lens Type: Opal Polycarbonate Lens
- :: Lens Snaps into Housing
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included) See Page 2
- :: Power Cord comes out through the Suspension Hole onthe End of the Fixture from the Top
- :: 5-Year Warranty
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 3300LM
- :: Color Temperatures: 3000K/3500K/4000K/5000K
- :: Multi-CCT(Selectable Switch Inside Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: 50,000 Hours Rated Life
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
 | SCX-6FT-60W-MCT-D-IDL | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 60W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: Efficacy: 110 LPW
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included) See Page 2
- :: Power Cord comes out through the Suspension Hole on the End of the Fixture from the Top
- :: 5-Year Warranty
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 6600LM
- :: Color Temperatures: 3000K/3500K/4000K
- :: Multi-CCT(Selectable Switch Inside Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: 50,000 Hours Rated Life
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
| SCX-6FT-60W-MCT4-D-IND | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 60W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: Efficacy: 110 LPW
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: Lens Type: Opal Polycarbonate Lens
- :: Lens Snaps into Housing
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included) See Page 2
- :: Power Cord comes out through the Suspension Hole on the End of the Fixture from the Top
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 6600LM
- :: Color Temperatures: 3000K/3500K/4000K/5000K
- :: Multi-CCT(Selectable Switch Inside Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: 50,000 Hours Rated Life
- :: 5-Year Warranty
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
 | ULR-IN-16F-HO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8" on center, 19 per foot, 0.23 watts each chip
- :: Total Lumens: 310~350LM per ft.
- :: Color Temperature: 4000K
- :: Color Rendering Index: 90
- :: Beam Angle: 120º
| | SPEC |
 | SCX-8FT-80W-MCT-D-IDL | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 80W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: LPW: 110
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included) See Page 2
- :: Power Cord comes out through the Suspension Hole on the End of the Fixture from the Top
- :: 5-Year Warranty
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 8800LM
- :: Color Temperatures: 3000K/3500K/4000K
- :: Multi-CCT(Selectable Switch Inside Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: 50,000 Hours Rated Life
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
 | SCX-IC-MCT4 | - :: Lumens: 629LM/726LM/787LM/854LM
- :: Color Temperature: 3000K/3500K/4000K/5000K
- :: Ambient Temperature: -13°F~104°F
- :: Dimmable: 0~10V dimmable
- :: CRI:>80
- :: Power Factor:>0.95
- :: Efficacy: 110LM/W
- :: IP Rating: IP54
- :: Life Span: 50,000 hours
- :: Housing: White, Aluminum
- :: Lens: Frosted Polycarbonate
| | |
| SCX-8FT-80W-MCT4-D-IND | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 80W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: Efficacy: 110 LPW
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: Lens Type: Opal Polycarbonate Lens
- :: Lens Snaps into Housing
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included) See Page 2
- :: Power Cord comes out through the Suspension Hole on the End of the Fixture from the Top
- :: 5-Year Warranty
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 8800LM
- :: Color Temperatures: 3000K/3500K/4000K/5000K
- :: Multi-CCT(Selectable Switch Inside Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: Up Light Option Available
- :: 50,000 Hours Rated Life
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
| SCX-IC-MCT4 | - :: Lumens: 629LM/726LM/787LM/854LM
- :: Color Temperature: 3000K/3500K/4000K/5000K
- :: Ambient Temperature: -13°F~104°F
- :: Dimmable: 0~10V dimmable
- :: CRI:>80
- :: Power Factor:>0.95
- :: Efficacy: 110LM/W
- :: IP Rating: IP54
- :: Life Span: 50,000 hours
- :: Housing: White, Aluminum
- :: Lens: Frosted Polycarbonate
| | |
 | ULR-IN-98F-XHO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC BRCH |
 | DAB-SOL-PA3-2 | - :: 3 Inches Pole-Top Adapter For 2 Solar Bell-Light Arms + Solar Engine Mast
| | SPEC INST |
 | IGL-10W-RGBW | - :: Stainless Steel Cover/Aluminum Housing/SS Housing/PVC Sleeve
- :: LED: COB Technology (Dimmable)
- :: Lens: Glass
- :: Wattage: 10W
- :: Lumens: 620LM
- :: Voltage: 12V AC/DC
- :: Beam Angle: 90°
- :: Color Temp: RGB+W (W=3000K Warm White)
- :: 1-year warranty
- :: IP Rating: IP67, Wet Location
| | SPEC |
 | DAB-PA2-2 | - :: DAB 2in Pole Adapter For 2 Bell Arms, Black
| | INST SPEC |
 | DAB-SOL-PA4-2 | - :: 4 Inches Pole-Top Adapter For 2 Solar Bell-Light Arms + Solar Engine Mast
| | SPEC INST |
 | DAB-SOL-PA5-2 | - :: 5 Inches Pole-Top Adapter For 2 Solar Bell-Light Arms + Solar Engine Mast
| | INST SPEC |
 | IGL-1W-TRM-AL-RAZ | - :: Trims for 1W In-Ground Fixtures
| | |
 | DAB-PA3-2 | - :: DAB 3in Pole Adapter For 2 Bell Arms, Black
| | INST SPEC |
 | DAB-PA4-2 | - :: DAB 4in Pole Adapter For 2 Bell Arms, Black
| | INST SPEC |
 | IGL-1W-TRM-SS-SQSQ | - :: Trims for 1W In-Ground Fixtures
| | |
 | IGL-3W-TRM-AL-RLBN | - :: Trims for 3W In-Ground Fixtures
| | |
| SCX-IC-MCT4 | - :: Lumens: 629LM/726LM/787LM/854LM
- :: Color Temperatures: 3000K/3500K/4000K/5000K
- :: CRI: >80
- :: Power Factor: >0.95
- :: Efficacy: 110LM/W
- :: IP Rating: IP54
- :: Life Span: 50,000 hours
- :: Housing: White, Aluminum
- :: Lens: Frosted Polycarbonate
| | SPEC |
| SCX-IC-30K | - :: Lumens: 629LM
- :: Color Temperatures: 3000K
- :: CRI: >80
- :: Power Factor: >0.95
- :: Efficacy: 110LM/W
- :: IP Rating: IP54
- :: Life Span: 50,000 hours
- :: Housing: White, Aluminum
- :: Lens: Frosted Polycarbonate
| | SPEC |
| SCX-IC-35K | - :: Lumens: 726LM
- :: Color Temperatures: 3500K
- :: CRI: >80
- :: Power Factor: >0.95
- :: Efficacy: 110LM/W
- :: IP Rating: IP54
- :: Life Span: 50,000 hours
- :: Housing: White, Aluminum
- :: Lens: Frosted Polycarbonate
| | SPEC |
| SCX-IC-40K | - :: Lumens: 787LM
- :: Color Temperatures: 4000K
- :: CRI: >80
- :: Power Factor: >0.95
- :: Efficacy: 110LM/W
- :: IP Rating: IP54
- :: Life Span: 50,000 hours
- :: Housing: White, Aluminum
- :: Lens: Frosted Polycarbonate
| | SPEC |
| SCX-IC-50K | - :: Lumens: 854LM
- :: Color Temperatures: 5000K
- :: CRI: >80
- :: Power Factor: >0.95
- :: Efficacy: 110LM/W
- :: IP Rating: IP54
- :: Life Span: 50,000 hours
- :: Housing: White, Aluminum
- :: Lens: Frosted Polycarbonate
| | SPEC |
 RESIZED.jpg?alt=media)
 1 RESIZED.jpg?alt=media)
 1 RESIZED.jpg?alt=media)
.jpeg?alt=media)
 RESIZED.jpg?alt=media)
 RESIZED.jpg?alt=media)
