 | W2B50-5 | - :: Dimensions: width 4-9/16", height 4-½", depth 2"
- :: Material: die-cast aluminum with powder-coated finish
- :: Outlet holes: available with 3, 4, 5, 6, 7, or 9 outlet holes
- :: Hole size: available in ½" or ¾" threaded outlet holes
- :: Color: grayPRODUCT FEATURES
- ::: Reinforced connector outlets
- :: Scratch resistant powder-coated finish
- :: Suitable for wet locations - NEMA 3R rated
- :: Connector outlets accept threaded fittings & conduit
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, mounting lugs and ground screws included
- :: "X" denotes boxes with side outlets
| | |
 | W1B50-5 | - :: Dimensions: width 2-¾", height 4-½", depth 2"
- :: Material: die-cast aluminum with powder-coated fnish
- :: Available with 3, 4, or 5 reinforced threaded outlet holes
- :: Outlet hole sizes: available in ½" or ¾" threaded outlet holes
- :: Color: gray (select items available in white*)PRODUCT FEATURES
- ::: Scratch resistant powder-coated fnish
- :: Suitable for wet locations - NEMA 3R rated
- :: Reinforced connector outlets that accept threadedfttings & conduits
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, mounting lugs and ground screws included*
- :: "X" denotes boxes with side outlets
| | |
| W1B75-5 | - :: Dimensions: width 2-¾", height 4-½", depth 2"
- :: Material: die-cast aluminum with powder-coated fnish
- :: Available with 3, 4, or 5 reinforced threaded outlet holes
- :: Outlet hole sizes: available in ½" or ¾" threaded outlet holes
- :: Color: gray (select items available in white*)PRODUCT FEATURES
- ::: Scratch resistant powder-coated fnish
- :: Suitable for wet locations - NEMA 3R rated
- :: Reinforced connector outlets that accept threadedfttings & conduits
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, mounting lugs and ground screws included*
- :: "X" denotes boxes with side outlets
| | |
 | W2DB100-5 | - :: Dimensions: width 4-9/16", height 4-½", depth 2-5⁄8"
- :: Material: die-cast aluminum with powder-coated finish
- :: Outlet holes: available with 5 or 7 outlets
- :: Hole sizes: available in ½", ¾", or 1" threaded outlet holes
- :: Color: grayPRODUCT FEATURES
- ::: Reinforced connector outlets
- :: Scratch resistant powder-coated finish
- :: Suitable for wet locations - NEMA 3R rated
- :: Connector outlets accept threaded fittings & conduit
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, mounting lugs and ground screws included
- :: "X" denotes boxes with side outlet
| | |
| W2DB75-5 | - :: Dimensions: width 4-9/16", height 4-½", depth 2-5⁄8"
- :: Material: die-cast aluminum with powder-coated finish
- :: Outlet holes: available with 5 or 7 outlets
- :: Hole sizes: available in ½", ¾", or 1" threaded outlet holes
- :: Color: grayPRODUCT FEATURES
- ::: Reinforced connector outlets
- :: Scratch resistant powder-coated finish
- :: Suitable for wet locations - NEMA 3R rated
- :: Connector outlets accept threaded fittings & conduit
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, mounting lugs and ground screws included
- :: "X" denotes boxes with side outlet
| | |
| WRB75-5 | - :: Dimensions: 4" diameter x 1-½" deep
- :: Material: die-cast aluminum with powder-coated finish
- :: Outlet holes: 5 holes (round box) /4 holes (round extension ring)
- :: Hole size: available with ½" or ¾" outlets
- :: Color: gray (select items available in white and bronze)PRODUCT FEATURES
- ::: Reinforced connector outlets
- :: Scratch resistant powder-coated finish
- :: Suitable for wet locations - NEMA 3R rated
- :: Connector outlets accept threaded fittings & conduit
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, ground screw included.
- :: Weatherproof rings include closure plugs and gasket
| | |
| W2B75-5 | - :: Dimensions: width 4-9/16", height 4-½", depth 2"
- :: Material: die-cast aluminum with powder-coated finish
- :: Outlet holes: available with 3, 4, 5, 6, 7, or 9 outlet holes
- :: Hole size: available in ½" or ¾" threaded outlet holes
- :: Color: grayPRODUCT FEATURES
- ::: Reinforced connector outlets
- :: Scratch resistant powder-coated finish
- :: Suitable for wet locations - NEMA 3R rated
- :: Connector outlets accept threaded fittings & conduit
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, mounting lugs and ground screws included
- :: "X" denotes boxes with side outlets
| | |
| W2DB50-5 | - :: Dimensions: width 4-9/16", height 4-½", depth 2-5⁄8"
- :: Material: die-cast aluminum with powder-coated finish
- :: Outlet holes: available with 5 or 7 outlets
- :: Hole sizes: available in ½", ¾", or 1" threaded outlet holes
- :: Color: grayPRODUCT FEATURES
- ::: Reinforced connector outlets
- :: Scratch resistant powder-coated finish
- :: Suitable for wet locations - NEMA 3R rated
- :: Connector outlets accept threaded fittings & conduit
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, mounting lugs and ground screws included
- :: "X" denotes boxes with side outlet
| | |
| WRB50-5 | - :: Dimensions: 4" diameter x 1-½" deep
- :: Material: die-cast aluminum with powder-coated finish
- :: Outlet holes: 5 holes (round box) /4 holes (round extension ring)
- :: Hole size: available with ½" or ¾" outlets
- :: Color: gray (select items available in white and bronze)PRODUCT FEATURES
- ::: Reinforced connector outlets
- :: Scratch resistant powder-coated finish
- :: Suitable for wet locations - NEMA 3R rated
- :: Connector outlets accept threaded fittings & conduit
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, ground screw included.
- :: Weatherproof rings include closure plugs and gasket
| | |
 | WRB50-5-W | - :: Dimensions: 4" diameter x 1-½" deep
- :: Material: die-cast aluminum with powder-coated finish
- :: Outlet holes: 5 holes (round box) /4 holes (round extension ring)
- :: Hole size: available with ½" or ¾" outlets
- :: Color: gray (select items available in white and bronze)PRODUCT FEATURES
- ::: Reinforced connector outlets
- :: Scratch resistant powder-coated finish
- :: Suitable for wet locations - NEMA 3R rated
- :: Connector outlets accept threaded fittings & conduit
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, ground screw included.
- :: Weatherproof rings include closure plugs and gasket
| | |
 | WRB50-5-BRZ | - :: Dimensions: 4" diameter x 1-½" deep
- :: Material: die-cast aluminum with powder-coated finish
- :: Outlet holes: 5 holes (round box) /4 holes (round extension ring)
- :: Hole size: available with ½" or ¾" outlets
- :: Color: gray (select items available in white and bronze)PRODUCT FEATURES
- ::: Reinforced connector outlets
- :: Scratch resistant powder-coated finish
- :: Suitable for wet locations - NEMA 3R rated
- :: Connector outlets accept threaded fittings & conduit
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, ground screw included.
- :: Weatherproof rings include closure plugs and gasket
| | |
 | PL12-ILDMR-BK | | | |
| MSO-IP66-I | - :: Polycarbonate construction
- :: Ideal for dusk to dawn operation
- :: 1/2 NPT threads fit into 1/2” weatherproof box outlets
- :: Wet location listed (NEMA 3R rated)
- :: Full one year warranty
| |  SPEC BRCH |
 | CDLX-SM-5-25W-30K | - :: Input Wattage: 5W/ 10W/ 15W/ 25W
- :: Input Current: 0.6A MAX
- :: Input Voltage: 120-277VAC 50/60Hz
- :: Power factor: >0.90
- :: LPW: 120
- :: Die-cast aluminum with bronze
- :: Four 1/2” threaded hubs located on four sides ofthe housing
- :: Prismatic polycarbonate lens
- :: Lifespan: 70000 Hrs
- :: Operating temperature: -4°F ~ 104°F
- :: IP rating: IP65, Wet Locations
- :: Dimming: 0~10V dimmable
- :: LED type/ Brand: SMD 3030/ Philips Lumileds LEDs
- :: Total lumens: 3000LM Max.
- :: Color temperature: 3000K/ 4000K/ 5000K
- :: Color rendering index: >80
- :: Beam angle: 150°
- :: Lifespan: 70000 Hrs
| | |
 | LSWX-5-30W-50K-PC | - :: Voltage: 120-277VAC 60Hz
- :: Wattage: 5W/10W/20W/30W
- :: Power Factor: >0.90
- :: Efficacy: 124 LPW
- :: Includes Pre-wired Photo Electric Control (Dusk to DawnPhotocell), 120 Volt, Removable
- :: Photocell Response Time: Maximum 3 Seconds
- :: Back plate: Aluminum LED board: High Conductive,Waterproof, Aging Resistance, Salt Mist Resistance
- :: Threaded 1/2” Knockout Provided on Top Section of theBack
- :: Polycarbonate Housing & Lens
- :: Non-Cutoff Optics Ideal for Maximum Light Distribution
- :: Operating Temperature: -4ºF -104ºF
- :: Wet Location
- :: 7-Year Warranty
- :: IP54
- :: Dimmable: 0~10V Dimming
- :: LED Type/Brand: 2835LUMILEDS
- :: Front: Polycarbonate Lens and Housing
- :: Multi-Power (The switch is inside the fixture)
- :: Total Lumens: 3600LM Max.
- :: Color Temperatures: 3000K/4000K/5000K
- :: Color Rendering Index: CRI ≥ 70
- :: Beam Angle: 90° x 110°
- :: Rated life: 70,000 Hrs
| | |
 | CRLE4-5-12W-MCTP-WH | - :: Voltage: 120-277V AC
- :: Output Voltage: 36VDC
- :: Power Factor: >0.90
- :: Wattage: 5W/7W/12W
- :: Efficacy: 100LM/W
- :: Total Harmonic Distortion: ≤15 %
- :: 2FT Flex Whip With Push-in Connector
- :: 16” Earthquake Safety Cable Incl.
- :: Mounting Options: Recessed
- :: Temperature Rating: Designed To Operate inTemperatures 113°F
- :: No IC-Rated
- :: Suitable For Damp Locations
- :: 5-Year Warranty
- :: MCTP: The Switch Is On The Light Engine
- :: Dimming: 0~10V Dimmable
- :: Total Lumens: 1200LM Max.
- :: Color Temperature: 3000K/4000K/5000K
- :: Color Rendering index: >80
- :: Beam Angle: 100°-110°
- :: Rated Life: 50,000 hrs
| | SPEC  IES |
 | CMC-OWCC-BK | - :: 5In Old-Work Recessed Ceiling Canopy With Junction Box For CMC Cylinders, Black
| | SPEC |
 | FLDXPRO-SM-5-15W-MCTPB-BR | - :: Voltage: 120-277V
- :: Power Factor: >0.9
- :: Wattage: 5W/10W/15W
- :: Efficacy: 95 LPW
- :: Die-cast Aluminum Housing with Powder Coat Finish(Dark Bronze)
- :: DC Button Photocell with ON/OFF switch Included
- :: Cord type: 18” SJTW 18/3 AWG cable
- :: 1/2” Threaded Knuckle Stem
- :: Operating Temperature: -40°F to 104°F
- :: IP Rating: IP65
- :: Suitable for Wet Locations
- :: 7-Year Warranty
- :: Lens Type: Plaid Tempered Glass + Aluminum Reflectors
- :: Total Lumens: 1425LM Max.
- :: Color Temperatures: 3000K/4000K/5000K
- :: Color Rendering Index: CRI ≥ 80
- :: Beam Angle: 25° to 60°
- :: Lifespan: 70,000 Hrs.
| | SPEC IES |
 | LEDDR-24V-60W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 18-25V
- :: Output Current: 2.5A Max
- :: Output Power: 60W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 0.62A@120VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.6ms @120Vac
- :: Power Efficiency: 87% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
 | WFL-105-PC-5B-52-WH-WH | - :: Voltage: 120V AC 50/60Hz
- :: Wattage: 7W x 3
- :: Power Factor: >0.99
- :: Efficacy: 85 LPW
- :: Metal Housing (White Finish) & MDF Blades (White Finish)
- :: Motor: Reversible 3-Speed AC Motor with 80” Lead Wire. Includes (1) 6” Downrod
- :: Blades: 52” Sweep, 5-Blade Reversible Configurations
- :: Pull Chain: Two 12” Pull Chains
- :: Blade Pitch Angle: 12°
- :: Maximum Ambient Temperature: -.4°F to 104°F
- :: Suitable For Dry Location Only
- :: 3-Year Warranty
- :: Three LED 7W A15 Lamps Included. E26 Medium Base
- :: Total Lumens: 600LM x 3
- :: Color Temperatures: 3000K
- :: Color Rendering Index: CRI ≥ 90
- :: Rated life: 50,000 Hrs
- :: Fan Diameter: 52”
- :: Motor Lead Lengths: 17”
- :: Motor Size: AC 153mm x 18mm
- :: Electricity Use: 51.27W ~ 12.42W
- :: AMPS : 0.43 ~ 0.21
- :: RPM (H/M/L): 218/165/95
- :: Airflow Efficiency (CFM/W): 113
- :: Airflow (CFM): High Speed: 4983
- :: Average Airflow CFM: 3749
| | SPEC INST |
 | LCFPM-MCT5-BK | - :: Voltage: 120V AC 50/60Hz
- :: Wattage: 10W
- :: Power Factor: >0.90
- :: Efficacy: 70 LPW
- :: Black and White Finish
- :: Spun Steel Housing
- :: Polycarbonate Lens
- :: 4.5’ Adjustable Cord
- :: Maximum Ambient Temperature: -22°F to 104°F
- :: IP55 Suitable for Damp Location
- :: 5-Year Warranty
- :: Multi CCT (Selectable Switch under the lens)
- :: Dimming: TRIAC Dimming (Dimmable Down to 5% Compatible with Traic and ELV Dimmers)
- :: Total Lumens: 700LM
- :: Color Temperatures: 2700K/3000K/3500K/4000K/5000K
- :: Color Rendering Index: CRI ≥ 90
- :: Beam Angle: 120°
- :: Rated life: 50,000 Hrs
| | SPEC INST |
 | WMCS5-UDL-MCT-BN-DD | - :: Voltage: 120-277V AC
- :: Power Factor: >0.95
- :: Wattage: 40W
- :: Efficacy: 80 LPW
- :: THD: <20%
- :: Housing: Die-cast Aluminum & Glass
- :: Finish: Black, Bronze, Brushed Nickel & White
- :: Maximum Ambient Temperature: -68°F to 104°F
- :: Suitable for Wet Location
- :: Dimming: (Dual Function) Triac Dimmable at 120V &1-10V Dimming at 120-277V
- :: Total Lumens: 3200LM
- :: Color Temperatures: 3000K/4000K/5000K
- :: Multi CCT (Selectable Switch on the Bottom of theArm, Protected by Silicon Cover to be Waterproof)
- :: Color Rendering Index: CRI ≥ 80
- :: Rated life: 70,000 hrs
- :: Beam angle: 45º for each side
| | SPEC IES |
 | FMLS-R5-MCT5-DT | - :: Voltage: 120V AC
- :: Power Factor: >0.90
- :: Wattage: 11W
- :: Efficacy: 62 LPW
- :: White Finish
- :: Stainless Steel Test Button with Integrated Indicator Light
- :: Die-cast Aluminum. Powder-Coated
- :: Maximum Ambient Temperature: 32°F to 104°F
- :: 5-Year Warranty
- :: Wet Location
- :: Multi CCT (Selectable Switch on Driver)
- :: LED: Edge Lit LED Technology
- :: Dimming: TRIAC Dimming (Using Standard TRIAC LED Dimmers)
- :: 4W, 60V, 2500mAh Li-ion Battery for Minimum 90 Total Lumens: Min. 680LM ~ Max. 805LM
- :: Color Temperatures: 2700K/3000K/3500K/4000K/5000K
- :: Color Rendering Index: CRI ≥ 90
- :: Beam angle: 120°
- :: Rated life: 50,000 hrs
| | SPEC INST |
 | WFL-107-PC-5B-52-WH-WH | - :: Voltage: 120V AC 50/60Hz
- :: Wattage: 9W x 2
- :: Power Factor: >0.99
- :: Efficacy: 85 LPW
- :: Metal Housing (White Finish) & MDF Blades (White Finish)
- :: Motor: Reversible 3-Speed AC Motor with 80” Lead Wire. Includes (1) 6” Downrod
- :: Pull Chain: Two 12” Pull Chains
- :: Blade Pitch Angle: 12°
- :: Maximum Ambient Temperature: -.4°F to 104°F
- :: Suitable For Dry Location Only
- :: 3-Year Warranty
- :: Two LED 9W A19 Lamps Included. E26 Medium Base
- :: Total Lumens: 800LM x 2
- :: Color Temperatures: 3000K
- :: Color Rendering Index: CRI ≥ 90
- :: Rated Life: 50,000 Hrs
- :: Fan Diameter: 52”
- :: Motor Lead Lengths: 17”
- :: Motor Size: AC 153mm x 18mm
- :: Electricity Use: 51.27W ~ 12.42W
- :: AMPS : 0.43 ~ 0.21
- :: RPM (H/M/L): 218/165/95
- :: Airflow Efficiency (CFM/W): 113
- :: Airflow (CFM): High Speed: 4983
- :: Average Airflow CFM ave: 3749
| | SPEC INST |
 | ULR-IN-16F-SO-27K | - :: LED: SMD2216 chip spaced 5/8" on center, 19 per foot, 0.08 watts each chip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 watts per foot
- :: Lumens: 100 lumens per foot, 4.73 LM per LED
- :: CRI: 90
- :: Max run: 32'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC |
 | ULR-IN-16F-HO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
 | HL2R-ICAT | - :: Four remodel clips secure the housing and accommodate 1/2” and 5/8” ceiling materials.
- :: Single-wall painted steel housing with gasket for IC-rated airtight installation in insulated ceilings
- :: Airtight to prevent heated airflow diffusion
- :: IC-rated; can be directly installed on ceiling insulation
- :: 7-Year Warranty
- :: Listed for through-branch circuit wiring
- :: Contains nine 8-3/5” knockouts and four Romex pry-outs with strain relief
- :: Ground wire provided in J-box
- :: Three quick connectors provided on J-Box
- :: UL listed for damp location.
- :: UL listed for Air Tight construction
| | SPEC INST |
| CDLX-SM-5-25W-40K | - :: Input Wattage: 5W/ 10W/ 15W/ 25W
- :: Input Current: 0.6A MAX
- :: Input Voltage: 120-277VAC 50/60Hz
- :: Power factor: >0.90
- :: LPW: 120
- :: Die-cast aluminum with bronze
- :: Four 1/2” threaded hubs located on four sides ofthe housing
- :: Prismatic polycarbonate lens
- :: Lifespan: 70000 Hrs
- :: Operating temperature: -4°F ~ 104°F
- :: IP rating: IP65, Wet Locations
- :: Dimming: 0~10V dimmable
- :: LED type/ Brand: SMD 3030/ Philips Lumileds LEDs
- :: Total lumens: 3000LM Max.
- :: Color temperature: 3000K/ 4000K/ 5000K
- :: Color rendering index: >80
- :: Beam angle: 150°
- :: Lifespan: 70000 Hrs
| | |
 | FLDXPRO-SM-5-15W-MCTPB-BK | - :: Voltage: 120-277V
- :: Power Factor: >0.9
- :: Wattage: 5W/10W/15W
- :: Efficacy: 95 LPW
- :: Die-cast Aluminum Housing with Powder Coat Finish(Black)
- :: DC Button Photocell with ON/OFF switch Included
- :: Cord type: 18” SJTW 18/3 AWG cable
- :: 1/2” Threaded Knuckle Stem
- :: Operating Temperature: -40°F to 104°F
- :: IP Rating: IP65
- :: Suitable for Wet Locations
- :: 7-Year Warranty
- :: Lens Type: Plaid Tempered Glass + Aluminum Reflectors
- :: Total Lumens: 1425LM Max.
- :: Color Temperatures: 3000K/4000K/5000K
- :: Color Rendering Index: CRI ≥ 80
- :: Beam Angle: 25° to 60°
- :: Lifespan: 70,000 Hrs.
| | SPEC IES |
| LSWX-5-30W-30K-PC | - :: Voltage: 120-277VAC 60Hz
- :: Wattage: 5W/10W/20W/30W
- :: Power Factor: >0.90
- :: Efficacy: 124 LPW
- :: Includes Pre-wired Photo Electric Control (Dusk to DawnPhotocell), 120 Volt, Removable
- :: Photocell Response Time: Maximum 3 Seconds
- :: Back plate: Aluminum LED board: High Conductive,Waterproof, Aging Resistance, Salt Mist Resistance
- :: Threaded 1/2” Knockout Provided on Top Section of theBack
- :: Polycarbonate Housing & Lens
- :: Non-Cutoff Optics Ideal for Maximum Light Distribution
- :: Operating Temperature: -4ºF -104ºF
- :: Wet Location
- :: 7-Year Warranty
- :: IP54
- :: Dimmable: 0~10V Dimming
- :: LED Type/Brand: 2835LUMILEDS
- :: Front: Polycarbonate Lens and Housing
- :: Multi-Power (The switch is inside the fixture)
- :: Total Lumens: 3600LM Max.
- :: Color Temperatures: 3000K/4000K/5000K
- :: Color Rendering Index: CRI ≥ 70
- :: Beam Angle: 90° x 110°
- :: Rated life: 70,000 Hrs
| | |
 | CMC-OWCC-WH | - :: 5In Old-Work Recessed Ceiling Canopy With Junction Box For CMC Cylinders, White
| | SPEC |
 | LEDDR-24V-96W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 18-25V
- :: Output Current: 4x4A Max
- :: Output Power: 96W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 3.9A@110VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.4ms @277Vac
- :: Power Efficiency: 85% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
 | WMCS5-UDL-MCT-BR-DD | - :: Voltage: 120-277V AC
- :: Power Factor: >0.95
- :: Wattage: 40W
- :: Efficacy: 80 LPW
- :: THD: <20%
- :: Housing: Die-cast Aluminum & Glass
- :: Finish: Black, Bronze, Brushed Nickel & White
- :: Maximum Ambient Temperature: -68°F to 104°F
- :: Suitable for Wet Location
- :: Dimming: (Dual Function) Triac Dimmable at 120V &1-10V Dimming at 120-277V
- :: Total Lumens: 3200LM
- :: Color Temperatures: 3000K/4000K/5000K
- :: Multi CCT (Selectable Switch on the Bottom of theArm, Protected by Silicon Cover to be Waterproof)
- :: Color Rendering Index: CRI ≥ 80
- :: Rated life: 70,000 hrs
- :: Beam angle: 45º for each side
| | SPEC IES |
 | ULR-IN-PIDR-72W | - :: Input voltage: 100~240VAC, 50/60Hz
- :: AC Input Current: Max 1A
- :: Output power: 72W
- :: Output DC Voltage: 24VDC
- :: Min Load: 3A
- :: Rated Load: 3A
- :: Line Regulation: ± 5%
- :: Load Regulation: ± 5%
- :: Efficiency: 83% Min
- :: Turn on delay time: 2Sec Max. at 115VAC & Max Load
- :: Rise time: 40mS Min. at 115VAC & Max Load
- :: Hold up time: 5mS Min. at 115VAC & Max Load
- :: Male 24V connector included
- :: Operating Temperature: 32°F to 104°F
- :: Protection Function: Short Circuit Test, Over current protection, Over Voltage Protection
- :: Relative Humidity: 5% to 90% RH, 72Hrs, Full Load , Normal operating.
- :: Ripple and Noise: 150mV p-p
| | SPEC |
| CDLX-SM-5-25W-50K | - :: Input Wattage: 5W/ 10W/ 15W/ 25W
- :: Input Current: 0.6A MAX
- :: Input Voltage: 120-277VAC 50/60Hz
- :: Power factor: >0.90
- :: LPW: 120
- :: Die-cast aluminum with bronze
- :: Four 1/2” threaded hubs located on four sides ofthe housing
- :: Prismatic polycarbonate lens
- :: Lifespan: 70000 Hrs
- :: Operating temperature: -4°F ~ 104°F
- :: IP rating: IP65, Wet Locations
- :: Dimming: 0~10V dimmable
- :: LED type/ Brand: SMD 3030/ Philips Lumileds LEDs
- :: Total lumens: 3000LM Max.
- :: Color temperature: 3000K/ 4000K/ 5000K
- :: Color rendering index: >80
- :: Beam angle: 150°
- :: Lifespan: 70000 Hrs
| | |
| LSWX-5-30W-40K-PC | - :: Voltage: 120-277VAC 60Hz
- :: Wattage: 5W/10W/20W/30W
- :: Power Factor: >0.90
- :: Efficacy: 124 LPW
- :: Includes Pre-wired Photo Electric Control (Dusk to DawnPhotocell), 120 Volt, Removable
- :: Photocell Response Time: Maximum 3 Seconds
- :: Back plate: Aluminum LED board: High Conductive,Waterproof, Aging Resistance, Salt Mist Resistance
- :: Threaded 1/2” Knockout Provided on Top Section of theBack
- :: Polycarbonate Housing & Lens
- :: Non-Cutoff Optics Ideal for Maximum Light Distribution
- :: Operating Temperature: -4ºF -104ºF
- :: Wet Location
- :: 7-Year Warranty
- :: IP54
- :: Dimmable: 0~10V Dimming
- :: LED Type/Brand: 2835LUMILEDS
- :: Front: Polycarbonate Lens and Housing
- :: Multi-Power (The switch is inside the fixture)
- :: Total Lumens: 3600LM Max.
- :: Color Temperatures: 3000K/4000K/5000K
- :: Color Rendering Index: CRI ≥ 70
- :: Beam Angle: 90° x 110°
- :: Rated life: 70,000 Hrs
| | |
 | WMCS5-UDL-MCT-WH-DD | - :: Voltage: 120-277V AC
- :: Power Factor: >0.95
- :: Wattage: 40W
- :: Efficacy: 80 LPW
- :: THD: <20%
- :: Housing: Die-cast Aluminum & Glass
- :: Finish: Black, Bronze, Brushed Nickel & White
- :: Maximum Ambient Temperature: -68°F to 104°F
- :: Suitable for Wet Location
- :: Dimming: (Dual Function) Triac Dimmable at 120V &1-10V Dimming at 120-277V
- :: Total Lumens: 3200LM
- :: Color Temperatures: 3000K/4000K/5000K
- :: Multi CCT (Selectable Switch on the Bottom of theArm, Protected by Silicon Cover to be Waterproof)
- :: Color Rendering Index: CRI ≥ 80
- :: Rated life: 70,000 hrs
- :: Beam angle: 45º for each side
| | SPEC IES |
 | FLDXPRO-SM-5-15W-MCTPB-WH-P | - :: Voltage: 120-277V
- :: Power Factor: >0.9
- :: Wattage: 5W/10W/15W
- :: Efficacy: 95 LPW
- :: Die-cast Aluminum Housing with Powder Coat Finish(White)
- :: DC Button Photocell with ON/OFF switch Included
- :: Cord type: 18” SJTW 18/3 AWG cable
- :: 1/2” Threaded Knuckle Stem
- :: Operating Temperature: -40°F to 104°F
- :: IP Rating: IP65
- :: Suitable for Wet Locations
- :: 7-Year Warranty
- :: Lens Type: Plaid Tempered Glass + AluminumReflectors
- :: Total Lumens: 1425LM Max.
- :: Color Temperatures: 3000K/4000K/5000K
- :: Color Rendering Index: CRI ≥ 80
- :: Beam Angle: 60°
- :: Lifespan: 70,000 Hrs.
| | SPEC IES |
| LEDDR-24V-120W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 18-25V
- :: Output Current: 5A Max
- :: Output Power: 120W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 1.3A@110VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.6ms @120Vac /25A, 50%, 1.4ms @277Vac
- :: Power Efficiency: 85% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
| LEDDR-24V-150W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 24V DC ± 0.5V DC
- :: Output Current: 12.5A Max
- :: Output Power: 150W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 1.8A@110VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.6ms @120Vac /25A, 50%, 1.4ms @277Vac
- :: Power Efficiency: 85% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
 | WMCS5-UDL-MCT-BK-DD | - :: Voltage: 120-277V AC
- :: Power Factor: >0.95
- :: Wattage: 40W
- :: Efficacy: 80 LPW
- :: THD: <20%
- :: Housing: Die-cast Aluminum & Glass
- :: Finish: Black, Bronze, Brushed Nickel & White
- :: Maximum Ambient Temperature: -68°F to 104°F
- :: Suitable for Wet Location
- :: Dimming: (Dual Function) Triac Dimmable at 120V &1-10V Dimming at 120-277V
- :: Total Lumens: 3200LM
- :: Color Temperatures: 3000K/4000K/5000K
- :: Multi CCT (Selectable Switch on the Bottom of theArm, Protected by Silicon Cover to be Waterproof)
- :: Color Rendering Index: CRI ≥ 80
- :: Rated life: 70,000 hrs
- :: Beam angle: 45º for each side
| | SPEC IES |
 | ULR-IN-16F-HO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8" on center, 19 per foot, 0.23 watts each chip
- :: Total Lumens: 310~350LM per ft.
- :: Color Temperature: 4000K
- :: Color Rendering Index: 90
- :: Beam Angle: 120º
| | SPEC |
| LEDDR-24V-192W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 24V DC ± 0.5V DC
- :: Output Current: 12.5A Max
- :: Output Power: 192W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 1.8A@110VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.6ms @120Vac /25A, 50%, 1.4ms @277Vac
- :: Power Efficiency: 85% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
 | WMCS5-DL-MCT-BN-DD | - :: Voltage: 120-277V AC
- :: Power Factor: >0.95
- :: Wattage: 20W
- :: Efficacy: 80 LPW
- :: THD: <20%
- :: Housing: Die-cast Aluminum & Glass
- :: Finish: Black,Bronze, Brushed Nickel & White
- :: Maximum Ambient Temperature: -68°F to 104°F
- :: Suitable for Wet Location
- :: Dimming: (Dual Function) Triac Dimmable at 120V &1-10V Dimming at 120-277V
- :: Total Lumens: 1600LM
- :: Color Temperatures: 3000K/4000K/5000K
- :: Multi CCT (Selectable Switch on the Bottom of theArm, Protected by Silicon Cover to be Waterproof)
- :: Color Rendering Index: CRI ≥ 80
- :: Rated life: 70,000 hrs
- :: Beam angle: 45º
| | SPEC |
| LEDDR-24V-288W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 24V DC ± 0.5V DC
- :: Output Current: 3x4A Max
- :: Output Power: 288W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 3.2A@110VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.6ms @120Vac /25A, 50%, 1.4ms @277Vac
- :: Power Efficiency: 85% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
 | DAB-SOL-PA5-1 | - :: 5 Inches Pole-Top Adapter For 1 Solar Bell-Light Arm + Solar Engine Mast
| | INST SPEC |
 | ULR-IN-98F-XHO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC BRCH |
 | HL4DW-ICAT | - :: Four remodel clips secure the housing and accommodate 1/2” and 5/8” ceiling materials.
- :: Single-wall painted steel housing with gasket for IC-ratedairtight installation in insulated ceilings
- :: Airtight to prevent heated airflow diffusion
- :: IC-rated; can be directly installed on ceiling insulation
- :: 7-Year Warranty
- :: Listed for through-branch circuit wiring
- :: Contains nine 8-3/5” knockouts and four Romex pry-outswith strain relief
- :: Ground wire provided in J-box
- :: Three quick connectors provided on J-Box
- :: UL listed for damp location.
- :: UL listed for Air Tight construction
| | SPEC INST |
 | LCF-ROD-5-BR | - :: 5In Suspension Rod For Ceiling Fixture Swivel Canopy, Bronze
| | SPEC INST |
| LEDDR-24V-384W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 24V DC ± 0.5V DC
- :: Output Current: 4x4A Max
- :: Output Power: 384W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 3.2A@110VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.6ms @120Vac /25A, 50%, 1.4ms @277Vac
- :: Power Efficiency: 85% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
 | WMCS5-DL-MCT-WH-DD | - :: Voltage: 120-277V AC
- :: Power Factor: >0.95
- :: Wattage: 20W
- :: Efficacy: 80 LPW
- :: THD: <20%
- :: Housing: Die-cast Aluminum & Glass
- :: Finish: Black, Bronze, Brushed Nickel & White
- :: Maximum Ambient Temperature: -68°F to 104°F
- :: Suitable for Wet Location
- :: Dimming: (Dual Function) Triac Dimmable at 120V &1-10V Dimming at 120-277V
- :: Total Lumens: 1600LM
- :: Color Temperatures: 3000K/4000K/5000K
- :: Multi CCT (Selectable Switch on the Bottom of theArm, Protected by Silicon Cover to be Waterproof)
- :: Color Rendering Index: CRI ≥ 80
- :: Rated life: 70,000 hrs
- :: Beam angle: 45º
| | SPEC |
 | IGL-10W-RGBW | - :: Stainless Steel Cover/Aluminum Housing/SS Housing/PVC Sleeve
- :: LED: COB Technology (Dimmable)
- :: Lens: Glass
- :: Wattage: 10W
- :: Lumens: 620LM
- :: Voltage: 12V AC/DC
- :: Beam Angle: 90°
- :: Color Temp: RGB+W (W=3000K Warm White)
- :: 1-year warranty
- :: IP Rating: IP67, Wet Location
| | SPEC |
 | WMCS5-DL-MCT-BK-DD | - :: Voltage: 120-277V AC
- :: Power Factor: >0.95
- :: Wattage: 20W
- :: Efficacy: 80 LPW
- :: THD: <20%
- :: Housing: Die-cast Aluminum & Glass
- :: Finish: Black, Bronze, Brushed Nickel & White
- :: Maximum Ambient Temperature: -68°F to 104°F
- :: Suitable for Wet Location
- :: Dimming: (Dual Function) Triac Dimmable at 120V &1-10V Dimming at 120-277V
- :: Total Lumens: 1600LM
- :: Color Temperatures: 3000K/4000K/5000K
- :: Multi CCT (Selectable Switch on the Bottom of theArm, Protected by Silicon Cover to be Waterproof)
- :: Color Rendering Index: CRI ≥ 80
- :: Rated life: 70,000 hrs
- :: Beam angle: 45º
| | SPEC |
 | ULR-IN-98F-HO-35K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 3500K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-98F-XHO-35K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 3500K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | BRCH SPEC |
 | DAB-SOL-PA5-2 | - :: 5 Inches Pole-Top Adapter For 2 Solar Bell-Light Arms + Solar Engine Mast
| | INST SPEC |
 | HL6R-ICAT | - :: Four remodel clips secure the housing and accommodate 1/2” and 5/8” ceiling materials.
- :: Single-wall painted steel housing with gasket for IC-ratedairtight installation in insulated ceilings
- :: Airtight to prevent heated airflow diffusion
- :: IC-rated; can be directly installed on ceiling insulation
- :: 7-Year Warranty
- :: Listed for through-branch circuit wiring
- :: Contains nine 8-3/5” knockouts and four Romex pry-outs with strain relief
- :: Ground wire provided in J-box
- :: Three quick connectors provided on J-Box
- :: UL listed for damp location.
- :: UL listed for Air Tight construction
| | SPEC INST |
 | HL6-ICAT | - :: Four remodel clips secure the housing and accommodate 1/2” and 5/8” ceiling materials
- :: Single-wall painted steel housing with gasket for IC-rated airtight installation in insulated ceilings
- :: Airtight to prevent heated airflow diffusion
- :: IC-rated; can be directly installed on ceiling insulation lagging
- :: Listed for through-branch circuit wiring
- :: Contains nine 8-3/5” knockouts and four Romex pry-outs with strain relief
- :: Ground wire provided in J-box
- :: Three quick connectors provided on J-BoxvUL listed for damp location.
- :: UL listed for Air Tight construction
- :: Meet Title24 requirement
- :: ETLus
| | SPEC INST |
 | LCF-ROD-5-BN | - :: 5In Suspension Rod For Ceiling Fixture Swivel Canopy, Brushed Nickel
| | SPEC INST |
 | HL6S-ICAT | - :: Four remodel clips secure the housing and accommodate 1/2” and 5/8” ceiling materials.
- :: Single-wall painted steel housing with gasket for IC-rated airtight installation in insulated ceilings
- :: Airtight to prevent heated airflow diffusion
- :: IC-rated; can be directly installed on ceiling insulation lagging
- :: Listed for through-branch circuit wiring
- :: Contains nine 8-3/5” knockouts and four Romex pry-outs with strain relief
- :: Ground wire provided in J-box
- :: Three quick connectors provided on J-Box
- :: UL listed for damp location.
- :: UL listed for Air Tight construction
| | SPEC INST |
 RESIZED.jpg?alt=media)
 1 RESIZED.jpg?alt=media)
 1 RESIZED.jpg?alt=media)
 RESIZED.jpg?alt=media)
